402025 150mAh 3.7v hard case drone enrich power lithium polymer battery cells
| Capacity:: | 150mah | Voltage:: | 3.7V |
| Cycle life:: | More Than 500 Times | Charging voltage: | 4.2V |
| Minimum capacity: | 130mAh(0.2C Discharge) | Shipment voltage: | ≥3.85V |
| Battery pack impedance: | ≤120mΩ | Discharging cut-off voltage: | 3.0V |
Key Specifications/Special Features:
Specifications
1. Model: 302035-150mAh
2. Battery type: Li-Po battery
3. Nominal voltage: 3.7V
4. Charge voltage: 4.25V
5. Nominal capacity: 150mAh
6. Dimensions: 3.2x20.5x32.5mm with PCM
7. Standard discharging current: 0.2C
8. Maximum charging current: 1C
9. Standard charging current: 0.2C
10. Rap charging current: 1C
11. Self-discharge: <2%/month
12. Charging temperature: 0° to 45°C
13. Discharging temperature: -20 to 75°C
14. Storage temperature:
- -20 to 45°C (within 1month)
- -20 to 40°C (within 3month)
- -20 to 35°C (within 6month)
15. Certifications: RoHS Directive, UL, MSDS, REACH, UN 38.3
16. Weight: approximately 8g
17. Applications: GPS tracker, Bluetooth earphones use
Size of Lithium-polymer battery can be custom made, we have the advantage making special Li-Po battery such as extremely thin Li-Po battery (1.5mm), high-temperature Li-Po battery, low-temperature Li-Po battery, special shape Li-Po battery (round)

| Items | Parameter | |
| Nominal voltage | 3.7V | |
| Minimum capacity | 130mAh(0.2C discharge) | |
| Charging voltage | 4.2V | |
| Discharging cut-off voltage | 3.0V | |
| Standard charging | 0.2C /4.2V | |
| Max charging | 1.0C /4.2V | |
| Standard discharging | 0.2C/3.0V | |
| Max discharging | continuous discharge | 1.0C/3.0V |
| non-continuous discharge | 2.0C/3.0V | |
| Shipment voltage | ≥3.85V | |
| Battery pack impedance | ≤120m&OPurple Horn; | |
| Operating temperature | Charging: 0°C ~ 45°C | |
| Discharging: -20°C ~60°C | ||
|
Storage (At 50% SOC and specified temp, |
-10℃~25℃ | (12 months ≥85% ) |
| -10℃ ~45℃ | (6 months ≥85% ) | |
| -10℃~55℃ | (1 month ≥90% ) | |
| 20±5℃ is the recommended storage temperature | ||
| Visual Inspection |
There should not be any remarkable scratches, cracks, |
|
| Reference standard | GB/T 18287-2013,IEC/EN61960 | |